Sunday, 18 August 2019
Slider

Metalosate® Liquid Foliars

Sample Label

 Prod #07327
 
ZMI™

 

Guaranteed Analysis (w/w)

 
Total Nitrogen (N) 1.20%
 - 1.198% water soluble organic nitrogen  
 - 0.002% ammoniacal nitrogen  
Zinc (Zn) (Chelated) 2.00%
Iron (Fe) (Chelated) 2.00%
Manganese (Mn) (Chelated) 1.00%
Molybdenum (Mo) 0.10%
 
(Derived from Ammonium Molybdate; Derived from Ferrous Sulfate, Manganese Sulfate, and Zinc Sulfate complexed with amino acids from partially hydrolyzed vegetable protein)

Standard US Container Size: 2.5 gallon

Sample Label Text

General Information

Metalosate ZMI™ is designed for foliar application on plants to prevent or correct nutrient deficiencies that may limit crop growth and yields. It is water soluble and nontoxic to plants when applied as directed. For best results, apply Metalosate® ZMI™ according to recommendations based on plant tissue
or soil analysis.

Directions

Shake well before use. Keep from freezing.

Dilute one part Metalosate® ZMI™ with 20 or more parts water. Apply by a spray method and in an adequate amount of water that will provide complete coverage of the plants. Use of a non ionic wetting agent may improve spray coverage of
certain hard to wet plants. Do not apply undiluted.

Metalosate ZMI™ can be included in a regular spray program on crops. Consult with an Albion® representative on compatibility with other spray materials.

The rate of application will depend on the crop, stage of growth, and severity of deficiency. The maximum recommended rates are for mature, full-sized plants. Reduce the rates proportionately when spraying smaller plants.

Metalosate® ZMI™ may be used on legumes, grain crops, root crops, cucurbits, cole crops, leafy vegetables, woody and herbaceous ornamentals, deciduous fruits, vine crops, tropical and subtropical fruits, and many other crops.

Recommendations

Field Crops and Vegetables: pply 8 to 32 fluid ounces per acre during periods of rapid growth or nutritional stress. The application may be repeated 2 or more times through the growing season.

Tree Crops: Make an application of 8 to 64 fluid ounces per acre after the beginning of active growth. The application may be repeated at 2 to 4 week intervals through the growing season.

Grapes and Berries: Make an application of 8 to 64 fluid ounces per acre after active growth begins. The application may be repeated at intervals of one week or more through the vegetative‑growth period.

Turf: Apply 1 to 2 fluid ounces per 1000 square feet (10 to 20 milliliters per 100 square meters) during periods of active growth.

Ornamental Trees, Shrubs, and Flowering Plants: Dilute at a rate of 32 fluid ounces in 10 or more gallons (250 milliliters in 10 or more liters) of water and spray to complete coverage.

Comments

Albion loves to hear from our customers.
Please leave us a comment !